The DR® 42-Inch Lawn Mower Attachment is an optional finish-mower attachment designed to convert compatible DR® Field and Brush Mowers into a 42-inch-wide lawn mowing configuration. It features a 12-gauge steel deck, two 21-inch high-lift mulching blades, front caster wheels, and single-point cutting-height adjustment from 2 to 4.5 inches.

The attachment can be switched from the existing brush-mowing deck in approximately five minutes, according to the manufacturer.

Product Note: Globe Martio is an independent retailer. This attachment is manufactured by DR® Power Equipment and is not a Globe Martio-manufactured product. DR®, product names, trademarks, and manufacturer technologies belong to their respective owners.

42-Inch Cutting Width

The attachment provides a 42-inch-wide cutting path, making it suitable for mowing wider open areas.

Two 21-inch high-lift mulching blades provide the cutting action beneath the deck.

12-Gauge Steel Deck

The mower attachment uses a 12-gauge steel deck designed for the finish-mowing configuration.

High-Lift Mulching Blades

Two 21-inch high-lift mulching blades are included with the attachment.

The attachment can be converted from mulching to side discharge when used with the optional mulching kit specified by the manufacturer.

Single-Point Height Adjustment

Cutting height can be adjusted from 2 inches to 4.5 inches using the single-point height adjustment system.

Front Caster Wheels

Front caster wheels swivel in any direction to facilitate turning. The manufacturer also states that the caster wheels help prevent scalping.

Quick Deck Conversion

The attachment takes approximately five minutes to switch decks, according to the manufacturer.

Compatibility

The supplied manufacturer information lists compatibility with all PRO, PRO XL, and PRO MAX walk-behind Field and Brush Mower models.

The attachment is not compatible with the following models or model groups listed by the manufacturer:

• PREMIER Field and Brush Mowers
• XD26, XD30, and XD36 models
• FB26E
• 8 HP DR Field and Brush Mowers manufactured from 2001–2005
• 24-inch PREMIER DR Field and Brush Mowers manufactured from 2009 to present (serial #FBP00001 and above)
• 7 HP and 8.25 FPT 22-inch SCOUT DR Field and Brush Mowers manufactured from September 2003–2009 (serial #FBS000001/FBM000001 and above)

Customers should verify their mower’s exact model and serial number against the manufacturer’s compatibility information before ordering.

Optional Mulching Plate Kit

An optional Mulching Plate Kit is available for converting the attachment between mulching and side-discharge configurations, according to the supplied product information.

The Mulching Plate Kit is optional and is not included unless specifically stated in the product listing.

Product Specifications

• Product Type: Lawn Mower Attachment
• Manufacturer: DR® Power Equipment
• Cutting Width: 42 inches
• Deck Material: 12-gauge steel
• Blades: 2 × 21-inch high-lift mulching blades
• Height Adjustment: Single-point
• Cutting Height: 2 to 4.5 inches
• Wheels: Front caster wheels
• Deck Conversion Time: Approximately 5 minutes
• Mulching: Supported
• Side Discharge: Available with optional Mulching Plate Kit
• Compatible Models: PRO, PRO XL, and PRO MAX walk-behind models
• Optional Accessory: Mulching Plate Kit

The DR® 42-Inch Lawn Mower Attachment is available through Globe Martio for customers with a compatible DR® Field and Brush Mower. Compatibility should be confirmed using the specific mower model and applicable serial-number information before purchase.