The DR® PRO 26 Field and Brush Mower is designed for cutting thick field grass and clearing brush and saplings up to 2 inches in diameter. This model combines a 26-inch pivoting mower deck, a 10.5 HP Briggs & Stratton® OHV engine, geared transmission, large lugged tires, and a heavy-duty frame for use across rough and uneven terrain.

The PRO 26 also accepts the manufacturer’s optional attachments, allowing the same power unit to be used for additional seasonal tasks.

Product Note: Globe Martio is an independent retailer. This product is manufactured by DR® Power Equipment and is not a Globe Martio-manufactured product. DR®, Briggs & Stratton®, E Series™, and other manufacturer names, trademarks, and product technologies belong to their respective owners.

26-Inch Pivoting Mower Deck

The 26-inch mower deck provides a balance of cutting width and maneuverability for clearing fields and rough terrain. The deck pivots from side to side rather than remaining completely rigid, allowing it to follow changes in ground contours.

According to the manufacturer, the pivoting design helps minimize scalping and improve traction when operating over uneven ground.

10.5 HP Briggs & Stratton® E Series™ Engine

The PRO 26 is equipped with a 344cc, 10.5 HP Briggs & Stratton® E Series™ OHV engine with manual starting and a cast-iron cylinder sleeve.

The engine provides the power required for the mower’s intended field and brush clearing applications.

Field and Brush Clearing

The PRO 26 is designed to cut thick field grass and clear woody materials, including brush and saplings up to 2 inches in diameter. Its enclosed three-sided deck allows cut material to remain beneath the deck for additional chopping before being left on the ground.

The manufacturer describes this cutting action as producing a finer mulch while reducing the amount of material left in windrows compared with side-discharging mower designs.

Gear-Driven Transmission

The PRO 26 uses a gear-driven transmission with three forward speeds and one reverse speed. The geared system allows the operator to select a fixed ground speed appropriate for the terrain and mowing conditions.

Large Lugged Tires

The mower is equipped with 18-inch x 6.5-inch x 8-inch tires featuring lugged tread patterns. The tires are filled with sealant, according to the manufacturer, to provide resistance to punctures while supporting traction across rough terrain.

Heavy-Duty Blade Spindle

The blade spindle is made from 1.375-inch-thick cast iron and uses oversized, double-sealed bearings. The spindle is integrated into the mower deck housing and reinforced for durability and reduced vibration during operation.

Commercial-Grade Electric Clutch

The PRO 26 uses a commercial-grade, self-adjusting electric clutch designed to provide access to the mower’s optional attachment system. The clutch design eliminates the need for cables to stretch or idler pulleys to be manually adjusted.

The manufacturer reports that the clutch underwent 245 hours of testing and used approximately 10% of its tested service life during that testing.

Optional Attachments

The PRO 26 accepts the manufacturer’s optional PTO attachments through a quick-change coupling system. The available attachment options listed for this model include:

• 42-inch finish mower
• 30-inch snow thrower
• Wood chipper
• 42-inch grader blade

These optional attachments allow the PRO 26 platform to be used for additional seasonal applications beyond field and brush mowing. Attachments are optional and are not included unless specifically stated in the product listing.

Heavy-Duty Steel Construction

The PRO 26 uses a heavy-duty steel frame with reinforced areas designed to handle the demands associated with field and brush mowing. The frame and deck are finished with a powder coating intended to resist scratching and support long-term durability.

Adjustable Handlebars

The handlebars can be adjusted to provide a more suitable operating height for the operator, which can be particularly useful when working across uneven terrain.

Ergonomic Controls

The control layout places the mower’s operating controls on the control panel and handlebar grips, allowing the operator to make adjustments without having to move around the machine.

Product Specifications

• Product Type: Field and Brush Mower
• Model: PRO 26
• Engine: Briggs & Stratton® E Series™ OHV
• Engine Displacement: 344cc
• Engine Output: 10.5 HP
• Starting System: Manual start
• Cutting Deck: 26 inches
• Deck Type: Pivoting
• Brush/Sapling Clearing Capacity: Up to 2 inches in diameter
• Transmission: Gear-driven
• Forward Speeds: 3
• Reverse Speeds: 1
• Lubrication: Splash lubrication
• Tires: 18 inches x 6.5 inches x 8 inches
• Attachments: Accepts manufacturer’s optional attachments
• Manufacturer: DR® Power Equipment
• Assembly: Assembled in the USA using foreign and domestic parts

Manufacturer Warranty Information

• Engine: 2 years residential; 1 year commercial
• Machine: 2 years residential; 90 days commercial

Warranty coverage is provided by the manufacturer and may be subject to the manufacturer’s applicable warranty terms and conditions.